This PVC foam board extrusion line makes PVC foam boards non‑stop. It uses PVC powder as raw material.This complete integrated production line comes with an conical twin‑screw extruder. It also includes a special foaming die, calibration system, cooling rack, haul‑off unit, cutting machine, dust extraction unit and automatic stacking robot. All these components let you manufacture boards efficiently with stable quality.
The line reaches an extrusion output of roughly 350‑400 kg per hour. It outputs standard‑width 1220 mm PVC foam boards. You can adjust board thickness between 5 mm and 20 mm.The conical twin‑screw extruder plasticizes materials well and keeps processing steady. Meanwhile, the PID temperature control system and dedicated die temperature controllers keep production conditions stable.
Calibration and water‑cooling systems form extruded boards and bring down their temperature. The haul‑off unit moves material forward without interruption. The cutting machine cuts boards to your target length. The automatic stacking robot cuts down manual work after cutting finishes.
This all‑in‑one system fits manufacturers who want a full PVC foam‑board production solution. It brings extrusion, forming, cooling, cutting, dust extraction and automatic stacking together within one single line.
Working Principle
Raw Material Feeding
PVC powder is fed into the conical twin-screw extruder through a screw feeding system. The controlled feeding process ensures a continuous supply of raw material for production.
Heating, Mixing & Plasticization
The SJZ80/156 conical twin-screw extruder heats, mixes, and plasticizes the PVC material. PID temperature control helps maintain stable processing conditions, while the vacuum system assists with removing gases from the material.
Extrusion & Foaming
The processed PVC melt passes through the dedicated hanger-type foaming die. The die distributes the material evenly across the board width to form a continuous PVC foam board with an adjustable thickness of 5–20 mm.
Calibration & Cooling
The extruded board enters the calibration machine, which uses four pairs of calibration molds and water-cooled forming plates to shape and cool the board. It then passes through the 5-meter cooling rack for further cooling.
Haul-Off & Cutting
The haul-off unit, equipped with eight pairs of rubber rollers, continuously pulls the board through the production line. The cutting machine then cuts the board to the required length, with a maximum specified cutting width of 1220 mm.
Dust Extraction & Automatic Stacking
During cutting, the dust extraction unit collects cutting debris. The automatic stacking robot then arranges the finished PVC foam boards for convenient handling and subsequent packaging.
Details
SJZ80/156 Conical Twin-Screw Extruder
Designed for PVC powder processing, featuring effective plasticization, a 75 kW main motor, and a rated output of 350–400 kg/h.
Dedicated PVC Foaming Die
Features a hanger-type design and seven heating zones to support uniform melt distribution and adjustable board thickness.
Precise Temperature Control
Omron temperature controllers and PID-based regulation help maintain stable processing temperatures. Two die temperature control units use high-temperature heat-transfer oil.
Calibration & Cooling System
Equipped with four pairs of calibration molds and water-cooled forming plates to shape and cool the board during continuous production.
Stable Haul-Off & Cutting
Eight pairs of rubber rollers provide continuous board pulling. The cutting unit accommodates a 1220 mm effective cutting width and board thicknesses of 5–20 mm.
Automatic Stacking & Dust Extraction
An automatic stacking robot handles finished boards, while a 5.5 kW dust extraction unit helps collect debris generated during cutting.
Request a Quote for PVC Foam Board Extrusion Line
Looking for a reliable PVC foam board production solution? Contact us for a customized quotation based on your production requirements. Please share your product specifications and expected output so our team can recommend a suitable configuration.
Please provide the following information:
Product Type: PVC foam board or other PVC sheet products
Required Production Capacity: Target output in kg/h
Board Width: Required board width in mm
Board Thickness: Minimum and maximum thickness in mm
Raw Material: PVC powder or other materials
Power Supply: Voltage, phase, and frequency
Installation Location: Country or region
Contact Information: Name, company, email, and phone/WhatsApp
Submit your inquiry today to receive a suitable equipment configuration and quotation for your PVC foam board production project.
IF YOU WANT TO KNOW MORE,PLEASE
Company Profile
ABOUT US
StarsPlas is a fully automatic equipment research and development company focusing on green building materials.
Our company is committed to providing industry 4.0 automation production solutions in accordance with European and American standards.
Furniture plank whole factory production equipment,Including automatic mixing system, extrusion production line, coating equipment, slotting equipment, laminating equipment and carton packaging equipment.
Description
STARSPLAS offers a PVC profile extrusion line designed for PVC wall panel production. The system integrates a 65/132 conical twin screw extruder, a single screw co-extruder, a profile die, a vacuum calibration table, a haul-o……
Description
The SJZ55/125-YF300 PVC Ceiling Panel Extrusion Line delivers efficient and continuous production of PVC ceiling panels, decorative panels, and various PVC profiles. The production line combines a SJZ55/125 conical twin-screw……
PVC Profile Production Line for Window, Door & Construction Profiles
Our PVC profile extrusion line is a turnkey solution for producing PVC window and door profiles, wall panels, cable trunking, corner beads and custom PVC profiles. ……
Industrial Water-Based Digital Printing Machine for PVC Flooring Film Description
The Water-Based Digital Printing Machine is designed for high-quality printing on PVC flooring films, PET/PP decorative films, and OPP/PET/PE flexible pack……