SPC FLOOR Pulse Bag Type Dust Collector Instruction Manual Book



  • Overview
  • Working Principle
  • Technical Characteristics
  • Operation Instructions
  • Maintenance and Overhaul
  • After Sales
  • Pulse Bag Type Dust Collector Instruction Manual File


The main features of the MXD252 pulse bag type dust collector introduced by our company are as follows:

1.1 Standardized design, perfect quality control processing and modular assembly.

1.2 Low-pressure injection technology: the application of low-pressure, high-efficiency, long-life diaphragm electromagnetic pulse valve, coupled with the unique design and processing means of the blowing tube, has completely changed the cleaning method of the bag filter.

1.3 Detection and monitoring technology application: For the characteristics of the dust collector, advanced online detection and monitoring equipment such as dust collector operating pressure detection, material level detection and operation equipment failure detection are set.

1.4 The use of the PLC programmable controller ensures the dust collector as the automation of the operation of the plant operation equipment.

Working principle

The pulse bag type dust collector is mainly composed of an upper box body, a ash bucket, an ash conveying system and a control system. The dusty flue gas enters the ash hopper from the air inlet through the box, and some of the larger dust particles directly fall into the ash hopper due to inertial collision and natural settlement, and other dust particles rise into the bag chambers with the airflow. After being filtered by the filter bag, the dust is retained on the outer surface of the filter bag, and the purified gas is discharged into the atmosphere from the inside of the filter bag through the bag mouth, the upper case, and the air outlet by the induced draft fan.


The working principle of the blowing system

The composition of the blowing system, one end of the pulse valve is connected to the compressed air tank, the other end is connected to the jet pipe, and the back valve of the pulse valve is connected to the control valve. The operation of the control valve is completed by the control cabinet. When there is no signal output from the control cabinet, the movable iron core of the control valve seals the exhaust port, and the pulse valve is closed. When the control cabinet sends a signal, the control valve will pulse the valve back pressure chamber. Interacting with atmospheric pressure (pressure relief), the pulse valve is opened, and the compressed air is injected into the venturi from the air bag through the pulse valve through the small hole of the injection pipe, causing positive pressure inside the filter bag to achieve cleaning.

Technical characteristics

MXD252 type pulse dust collector technical performance table

Serial number Technical performance MXD252 type
1 Handling air volume (m³/hour) 65000
2 Filtration area(㎡) 403
3 Number of filter bags 252
4 Filter bag size (diameter × length) φ130×4000
5 Filtering wind speed(m/s) 32
6 Equipment resistance(Pa) ≤2970
7 Dust removal efficiency(%) 99~99.5
8 Number of pulse valves 12
10 Main frame size (mm) (length × width × height) 5275×2510×8470
11 Fan air volume (m³/h) 53434~66388
12 Fan pressure(Pa) 3040~3206
13 Reducer power (Jiangsu Guomao) 3KW
14 Unloader motor power (Jiangsu Guomao) 2.2KW

Operating instructions

The pulse bag type dust collector is very simple to operate, and the control cabinet activates the fan, screw conveyor, unloader and pulse with one button.

Keep the host device in a normal state and keep it stable. The operation of the precipitator should be closely observed at the beginning of the startup.

When the precipitator is stopped, the screw conveyor and the unloader can be turned off after 25 minutes of normal operation.

Maintenance and overhaul of SPC Floor Pulse Bag Type Dust Collector

  1. The dust collector should be Specially assigned person for management;
  2. Record the dust cleaning and unloading times of the dust collector, fault conditions, etc.;
  3. All parts requiring refueling should be inspected regularly and refueled;
  4. The gas storage tank and the gas-water separator should be regularly discharged and cleaned regularly;
  5. Regularly check the working condition of the pulse blowing system, such as the wearing parts such as solenoid valves, and replace them in time if there is damage.
  6. The shut-off valve should be closed before replacement to discharge the compressed air in the air bag to prevent accidents;
  7. Regularly check the use of the blowing pipe to check whether the position needs to be corrected;
  8. Regularly check the sealing of all inspection doors. If the sealing strips are aging, replace them in time;
  9. The filter bag is vulnerable, and the damaged filter bag should be replaced in time. If the outlet is found to be ash, it indicates that the filter bag has been damaged. At this time, the fan is stopped first, the upper case is opened, the damaged filter bag is detected, and the replacement is performed. Before inserting the filter bag, remove the ash from the perforated plate to prevent the interface between the interface and the perforated plate from leaking, and the injection tube must be fixed after replacement.
  10. When the bag room is inspected, it is not allowed to be welded in the bag room. The bag room is strictly prohibited from smoking.

Pulse Bag Type Dust Collector Instruction Manual File(Click to read it)

MXD252 type Galvanized module pulse bag type dust collector instructions for use.pdf

Spread the love
Please get in touch
Our expert support team will answer all your questions.

    Live Support is available
    Mon-Sat 9am-5pm Beijing time

    • Email:
    • TEL:
      +86 512 5810 8898
    • WhatsApp/Cell:
      +86 18913613799
    • FAX:
      +86 512 58535268
    • ADD:
      Wanda Plaza 3506, No.20 Renmin East Road,
      Zhangjiagang China, P.O.215600