SPS-500 PVC Flooring Double-End Tenoner

Product Description:

The compact double-sided sizing machines offer excellent processing quality in a cost-effective solution that is guaranteed to impress. They stand out in their performance segment thanks to their precise, swiveling high-frequency motors and the free-standing switch cabinet with cooling unit. The tandem arrangement with offset station between the two sides of the SPS-500 is flexible and reduces setup times for length changes during crosswise profiling of flooring elements of different lengths.

Technical Specifications:

Product Three Views:

Q&A:

Q: What is a PVC Flooring Double-End Tenoner?

A: A PVC Flooring Double-End Tenoner is a machine that can cut, trim, groove, and profile the edges of PVC flooring planks with high efficiency and high precision.

Q: What are the advantages of using a PVC Flooring Double-End Tenoner?

A: Some of the advantages of using a PVC Flooring Double-End Tenoner are:

• It can process multiple planks at the same time, increasing the production capacity and reducing the labor cost.
• It can adjust the cutting speed, depth, angle, and width according to the requirements of different products, ensuring the quality and accuracy of the final products.
• It can automatically detect and correct the errors and defects of the planks, improving the product consistency and reliability.
• It can save energy and reduce noise and dust pollution, creating a safe and comfortable working environment.

Q: How to operate and maintain a PVC Flooring Double-End Tenoner?

A: To operate and maintain a PVC Flooring Double-End Tenoner, you need to follow these steps:

• Before starting the machine, check the power supply, the lubrication system, the safety devices, and the working condition of each component. Make sure everything is normal and ready.
• Set the parameters of the machine according to the specifications of the products you want to process. Load the planks into the feeding conveyor and start the machine. Monitor the processing process and make adjustments if necessary.
• After finishing the processing, unload the planks from the discharge conveyor and inspect them for any defects or errors. If there are any problems, troubleshoot them according to the manual or contact the service center.
• Clean the machine regularly and replace the worn-out parts timely. Keep the machine in good condition and avoid overloading or overheating.

Machine Display:

Contact Information:

Working time: 8:30-17:00, Monday-Friday (GMT 8+)

Mob |WeChat |WhatsApp: +86 189 136 13799

Email:  [email protected]

Website: www.starsplas.com

Office Address:

P.C.215600, Wanda Plaza 3503~3506, No.20 Renmin East Road,  ZhangJiaGang | JiangSu | CHINA

Factory Address:

P.C.215628, FengYun Intelligent Science Park, Changfu Road, ZhangJiaGang | JiangSu | CHINA