8 – 12%
Substrate Moisture Content
Approx. 45–50%
Solids Content
Aliphatic resin, water-based emulsion
Chemical Base
Off-white, smooth liquid
Appearance
~5°C
Minimum Film Forming Temperature
24 hours
Initial Cure Time| Parameter | Specification |
| Chemical Base | Aliphatic resin, water-based emulsion |
| Appearance | Off-white, smooth liquid |
| Solids Content | Approx. 45–50% |
| Viscosity (25°C) | 15,000–25,000 mPa·s (Brookfield) |
| pH Value | 5.5 – 7.0 |
| Minimum Film Forming Temperature | ~5°C |
| Density | Approx. 1.05 – 1.10 g/cm³ |
| Substrate Moisture Content | 8 – 12% |
| Application Amount | 120 – 150 g/m² (single-side); increase for profiled edges |
| Pressing Pressure (Hot Press) | 6 – 10 MPa |
| Vacuum Pressure | ~ -0.08 MPa |
| Hot Press Temperature | 70 – 90°C (avoid higher to prevent glue bleed) |
| Hot Press Time | 3 – 5 min (or 20 – 60 seconds depending on veneer thickness) |
| Vacuum Lamination Temperature | 80 – 130°C |
| Vacuum Lamination Time | 2 – 3 min (adjust based on temperature) |
| Open Time (at 25°C, 55% RH, 90–110 g/m²) | 10 – 15 minutes (extendable with higher coat weight) |
| Ambient Working Temperature | 15 – 30°C (avoid below 10°C; stop below 5°C) |
| Initial Cure Time | 24 hours |
| Final Bond Strength Achieved | 72 hours |
Starsplas presents our high-performance water-based wood veneer adhesive, specifically engineered for heat press and vacuum lamination applications. This premium adhesive is formulated with an aliphatic resin base, delivering exceptional initial tack, superior solvent resistance, and high bond strength—all while preventing blistering on wood veneers. Its balanced open time allows for easy veneer positioning, yet it cures rapidly under heat to boost production efficiency.
Ideal for high-grade and thick wood veneers used in premium custom furniture.
Suitable for profile pressing and vacuum lamination of wood doors and panel furniture components.
Strong Initial Tack – Ensures immediate grip, reducing veneer slippage during lay-up.
Compatible with Water-based Coatings – Seamlessly works with subsequent waterborne finishing systems.
Minimal Glue Penetration – Prevents bleed-through, preserving the natural beauty of thin or precious veneers.
Blue Stain Resistance – Inhibits fungal discoloration, maintaining veneer clarity over time.
StarsPlas is a fully automatic equipment research and development company focusing on green building materials.
Our company is committed to providing industry 4.0 automation production solutions in accordance with European and American standards.
Furniture plank whole factory production equipment,Including automatic mixing system, extrusion production line, coating equipment, slotting equipment, laminating equipment and carton packaging equipment.
Head Office
215625, Plant A18 Jinfeng Technology Innovation Park, Zhangjiagang, Jiangsu Province, PRC
Our Tel
(+86) 512-5810 8898
(+86) 189 136 13799
Our Email
